基本介紹
主要學術經歷,研究方向,學術兼職,主持的科研項目,學術代表作,
主要學術經歷
1994.3 －1997.6 哈爾濱工業大學動力工程系 博士生
1990.9 －1993.6 哈爾濱工業大學機械工程系 碩士生
研究方向
學科方向：轉子動力學；機械動力學；機械摩擦學
研究領域：高速加工工具機（高速精密電主軸；工具機結構動、熱態特性分析等）；電能存儲新技術（飛輪儲能系統）；
碩士生招生方向：機械CAD/CAE技術；機電產品動態特性分析與最佳化設計(以上2個方向任選其一，主要開展Pro/E、SolidWorks、ANSYS、Adams、Fluent、HyperWorks、AMESIM等軟體在機械產品設計中的套用研究。）
學術兼職
中國振動工程學會轉子動力學分會理事
全國高校製造技術與工具機研究會理事
中國機械工程學會高級會員
中國振動工程學會會員
中國宇航學會會員
“Journal of Journal of Thermal Science and Engineering Applications，Transactions of ASME"
“International Journal of Machine tool and Manufacture”
“Journal of Sound and Vibration”
“Mechanical Systems and Signal Processing”
“Mechanism and Machine Theory”
“Tribology Letter”
“Applied Surface Science"
“Journal of MaterialsProcessing Technology”
“機械工程學報”
“振動工程學報”
“摩擦學學報”
“太陽能學報”等國內外著名刊物特約審稿人。
“振動、測試與診斷”雜誌 常務編委
學術成就、獎勵及榮譽：
2017江蘇省科學技術獎一等獎：高速精密切削加工工具機設計理論及其工程套用
2009 教育部科技進步二等獎：高速加工工具機設計技術與工程套用
2007 中國機械工業科技進步三等獎：高速精密數控無心磨床的開發
2002 江蘇省科技進步二等獎：新一代數控高精度內園磨床
2000 國防科學技術獎三等獎：離心機帶孔擋板的應力分析
2006 教育部“新世紀優秀青年人才計畫”
2006 江蘇省“六大人才”高峰（A類）項目資助
2004 江蘇省“青藍工程”高校優秀青年骨幹教師獎
主持的科研項目
國家級項目：
國家自然科學基金項目：帶電渦流阻尼器與大承載永磁懸浮軸承的儲能飛輪轉子動力學研究
國家自然科學基金項目：最佳預緊力電主軸振動控制技術
國家自然科學基金項目：水靜壓高速電主軸動態特性分析與試驗研究
國家自然科學基金項目：飛輪儲能系統機電耦合與解耦設計的理論與方法
國家高技術研究計畫（863）項目：新型高效飛輪儲能關鍵技術研究
科技部科技人員服務企業行動項目：MKZ84系列數控軋輥磨床的開發及產業化
國家科技重大專項（高檔數控工具機與基礎製造裝備）： 新型高效、高速、高剛度、大功率電主軸及驅動裝置
國家科技重大專項（極大規模積體電路製造裝備及成套工藝）：Φ300mm矽片超精密磨片機的開發
中國博士後科學研究基金：飛輪儲能系統機電耦合非線性振動與飛輪本體結構最佳化設計
省部級項目：
江蘇省科技支撐計畫項目：Φ300mm大尺寸矽片超精密減薄裝置的開發
江蘇省自然科學基金項目：高速大功率電主軸的套用基礎研究
江蘇省高技術研究計畫：新一代高速無顫振工具機電主軸關鍵技術研究
江蘇省科技攻關項目：高速精密立式加工中心及其核心技術的研究與開發
江蘇省科技攻關項目：高速高精度數控無心磨床的開發
江蘇省科技攻關項目：YT5140CNC數控高速插齒機的開發及產業化
江蘇省重大科技成果轉化項目：高速、精密、大型數控齒輪工具機研發及產業化
江蘇省重大科技成果轉化項目子課題：系列化數控軸承內圓磨床的開發
江蘇省重大科技成果轉化項目子課題：系列化數控內圓磨床的開發
江蘇省重大科技成果轉化項目子課題：系列化高速電主軸的開發
清華大學摩擦學國家重點實驗室科研基金項目：高真空工況下超高速寶石軸承的摩擦學設計
清華大學摩擦學國家重點實驗室科研基金項目：超高速寶石軸承的摩擦學性能研究
企業委託項目：
6SD51高速電主軸開發
YT5140CNC數控高速插齒機的開發及產業化
高速精密立式加工中心關鍵技術研究
碟式離心機疲勞應力分析與強度設計
長壽命電能表寶石軸承潤滑油的研製
軍工項目：
寶石軸承的關鍵技術研究
寶石軸承表面工程與潤滑劑減摩抗磨協同效應研究
高速寶石軸承摩擦磨損台架模擬試驗研究
高速寶石軸承的磨損機理與延長壽命技術研究
學術代表作
發表學術論文80餘篇，國際刊物近40篇，SCI收錄近40篇，EI收錄50餘篇。部分代表論文：
1.Chundong Xu, Shuyun Jiang. Dynamic Analysis of a Motorized Spindle with Externally Pressurized Air Bearings. Journal of Vibration and Acoustics, Transactions of ASME, 2015(137): 041001-1- 041001-16
2.Chundong Xu;Shuyun Jiang. Analysis of static and dynamic characteristic of hydrostatic spherical hinge. Journal of Tribology, Transactions of ASME, 2015(137):021701- 021701-7
3.Shuyun Jiang, Hongchang Wang, Shaobo Wen. Flywheel energy storage system with a permanent magnet bearing and a pair of hybrid ceramic ball bearings,Journal of Mechanical Science and Technology2014, 28(12): 5043-5053
4.Feng Cheng, Shuyun Jiang. Cavitation erosion resistance of diamond-like carbon coating onstainless steel. Applied Surface Science. 2014 (292):16– 26
5.Lei Wang,Shuyun Jiang. Centrifugal effects on the dynamic characteristics of high speed hydrostatic thrust bearing lubricated by low viscosity fluid. Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology. 2014, 228(8):860–871 (Proc IMechE Part J: J Engineering Tribology)
6.LIN XiaoHui, ZHANG ChiBin, GU Jun, JIANG ShuYun ,YANG JueKuan, Poisson-Fokker-Planck model for biomolecules translocation through nanopore driven by electroosmotic flow. SCIENCE CHINA Physics, Mechanics & Astronomy 2014(10) 57 No. 11: 2104–2113
7.Lin, XH(Lin Xiaohui) ; Zhang, CB(Zhang Chibin) ; Yang, JK(Yang Juekuan) ; Jiang, SY(Jiang Shuyun) ; Ren, WS(Ren Weisong) ; Gu, J(Gu Jun). Nanofluids Transport Model Based on Fokker-Planck Equation and the Convection Heat Transfer Calculation. CHINESE JOURNAL OF MECHANICAL ENGINEERING卷: 26期: 6 頁: 1277-1284 DOI: 10.3901/CJME.2013.06.1277 出版年: NOV 2013
8.Feng Cheng; Shuyun Jiang; Jun Liang. Cavitation erosion resistance of microarc oxidation coating on aluminium alloy. Applied Surface Science2013,280 (9): 287-296
9.HuihuiFeng,ShuyunJiang.Multicriteria design of a rotary table with a hybrid constant flow and constant pressure supply system. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2013, 227 (10) 1165-1176
10.Shaobo Wen, Shuyun Jiang, Optimum Design of Hybrid Composite Multi-ring Flywheel Rotor Based on Displacement Method, Composites Science and Technology,2012 (72) 982–988
11.LIN Xiaohui*, CHEN Haiquan, JIANG Shuyun& ZHANG Chibin. A coulomb explosion theoretical model of femtosecond laser ablation materials，SCIENCE CHINA（中國科學），Technological Sciences 2012 Vol.55 No.2: 1–8
12.林曉輝, 張赤斌, 馬傳浩, 陳海全, 蔣書運納米流體在圓管中輸運的兩相流理論模型及黏度計算，中國科學2012 年第42 卷第6 期: 647–656
13.Shuyun Jiang, Hebing Mao. Investigation of the High Speed Rolling Bearing Temperature Rise with Oil-air Lubrication. Journal of Tribology, Transactions of ASME, 2011 (133): 021101-1-021101-9
14.Shuyun Jiang, Hongjun Xie. Tribological behavior of plasma-spray TiO2 coating against metallic bearing materials under oil lubrication. Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology, 2011(225): 128-138
15.Shuyun Jiang, Hongjun Xie. Synergistic effect of diisopropyl phosphite and ultra alkaline calcium sulfonate additives on tribological properties of AISI 52100 steel/Al2O3 ceramics.Lubrication Science. 2011(23):279-291
16.Shuyun Jiang, Hongjun Xie.Synergistic effect of diisopropyl phosphite and ashless organic ammonium phosphate salt additives on tribological properties of AISI 52100 steel/Al2O3 ceramics. Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology, 2011(225):263-275
17.Shuyun Jiang, Xiang Min, Thermal design of the vertical machining center headstock by the forcedcoolingmethod. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 2011(225): 773-780
18.Xiang Min, Shuyun Jiang. A thermal model of the ball screw feed drive system for machine tool,Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 2011(225):186-193
19.Shuyun Jiang, Yunjian Zheng. A contact stiffness model of machined joint surfaces, Journal of Tribology, Transactions of ASME, 2010 (132)：011401-1－011401-7
20.Shuyun Jiang, Shufei Zhen. Dynamic design of a high speed motorized spindle-bearing system, Journal of Mechanical Design, Transactions of ASME, 2010（131）034501-1－034501-5
21.Shuyun Jiang, Shufei Zheng, A modeling approach for analysis and improvement of spindle-drawbar-bearing assembly dynamics. International Journal of Machine Tools and Manufacture, 2010（50）：131－142
22.Shuyun Jiang, Hebing Mao, Investigation of variable optimum preload for a machine tool spindle, International Journal of Machine Tools and Manufacture, 2010（50）：19－28
23.Shuyun Jiang, Yunjian Zheng, Analytical model of thermal contact resistance based on Weierstrass-Mandelbrot (W-M) fractal function. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 2010(224)：959-967
24.Shuyun Jiang, Yufei Liang, A simplified calculating method of axial force for permanent magnetic bearing. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 2010(224): 703-708
25.Shuyun Jiang, Shifei Yang. Synergistic effect of diisopropyl phosphite and triphenyl thiophosphate additives on tribological properties of T8 Steel/Al2o3ceramics, Wear, 2010（258）: 777-783
26.Hongchang Wang, Shuyun Jiang, Zupei Shen.The dynamic analysis of an energy storage flywheel system with hybrid bearing support. Journal of Vibration and Acoustics, Transactions of ASME, 2009(131): 051006-1~051006-10
27.Xiaohui Lin, Juekuan Yang, Yuanzheng Sun, Shuyun Jiang. Ultra-short laser ablation of dielectrics: Theoretical analysis of threshold damage fluence and ablation depth. Applied Surface Science, 2009 (256):130–135
28.Xu Min, Jiang Shuyun, Cai Ying. An improved thermal model for machine tool bearings. International Journal of Machine Tools and Manufacture. 47(2007):53-62
29.Jiang Shuyun, Ju Lihua. Study on electromechanical coupling nonlinear vibration of flywheel energy storage system. Science in China: Series E Technological Sciences 2006 ,49(1):61-77
30.鞠立華，蔣書運。飛輪儲能系統機電耦合非線性動力學分析。中國科學（E輯），2006, 36(1): 68－83
